7 inch Mandala Silicone Mold || Silicone Mandala Mold for Resin Art || High Quality Silicone Mould

This Handmade Mold is 7 inches in diameter and 6mm thick. Size: 7” diameter 6mm thick This listing is for the mold only :) This is not food safe and it’s best applicable for resin casting. This listing is for the silicone mold only as shown in the photos for this listing. The processing time is 3-5 business days and if it’s already made it will be shipped earlier than the processing time. Please not the processing time is the time it take it make the mold and the delivery time is the time it takes for the order to be delivered once it has been handed over to the shipping company for example Canada Post. Delivery/Shipping estimated time: Canada (domestic): 2-15 business days (depending on the shipping option: express, expedited or standard) USA: 3-7 business days International: 5-21 business days Any order over $30 is fully tracked and tracking is provided once your order is processed and before it’s handed over to the post office. Silicone Heat Resistance: This silicone mold heat resistance is up to 450 degree Fahrenheit or 232 degree Celsius. Care for your mold: Please do not apply heat directly onto the silicone mold (this May cause your mold quality to deteriorate and even damage the surface of the mold) If you use a torch or heat gun to remove bubbles please do it very cautiously and quickly. Please do not apply the heat to one spot for more than 1-2 seconds as this will not only damage the mold but also release toxic fumes from the resin. If you need to pop a bubble try waiting for it to raise to the top or use a tiny pointy tool (example a pin to pop it or try moving it to the top by yourself and then pop it) If a bubble is on the surface on the mold the heat gun will not be able to remove it very easily, so waiting after a while for it to rise to the top or trying to pop it any other way will be much better to have the bubble removed. To remove tiny particles/debris from the mold please use a tape. Please make sure your resin is 100% cured prior to removing your finish piece of art from the mold. Removing uncured resin might ruin your mold. If the curing time has past and you still cannot remove your resin, it can mean many different things. 1) the resin was not mixed properly 2) the room might be cold and the resin needs more time to cure 3) sometimes adding additives might have caused a reaction that avoided the resin from curing as the way it should Of your resin is stock to the mold and you can’t remove it and the curing time has pass, you can place your mold and the stuck resin in a container filled with Very warm water. After 10 minutes you can try removing it since the resin would have soften and can be released by itself. If you have any questions about this mold, please feel free to send me a message and I will respond as quickly as I can! For coupons and shipping info please message me or follow me on Instagram: Classique Mold Happy Creating! 💜